Views: 0 Author: Site Editor Publish Time: 2026-11-18 Origin: Site
A fan is a filter, whether or not anybody calls it one. Every second it moves its own volume of shop air across the heatsink, and that air carries abrasive dust, oil mist and metal fines into the one place nobody can clean without a screwdriver.
That is the argument for the Meetneng GW200: a sealed aluminium box, 267 × 143 × 50 mm, about 2.5 kg, with no intake and no moving part inside. An Intel Core i5 runs at a 15 W TDP, the rated range is -10 °C to 60 °C, and the faceplate carries the ports integrators actually wire — up to six serial channels, two gigabit LAN, eight USB, HDMI and an eight-channel GPIO block. It is one of the fanless industrial mini PCs we build, and it exists because the cheapest box on the quotation is rarely the cheapest one to own.
The failure is never dramatic. It starts with a fan that still sounds normal and a CPU that idles two degrees warmer than it did last summer.
Dust settles on the fin stack in a mat, and a mat is an insulator. Thermal resistance climbs, the fan curves up to compensate, and the machine spends more of the year at its thermal ceiling. In a machining cell the dust is aluminium and cast-iron fines, which are conductive; once they bridge a connector, the fault is not overheating but a random stop nobody can reproduce.
The bearing is the second clock. A 40 mm fan at several thousand rpm has a service life in the tens of thousands of hours, which a two-shift plant reaches inside three years. Filters fail the same way in another form: they work only while somebody remembers them, and the maintenance sheet taped to the cabinet door is usually two quarters out of date. None of that enters a payback calculation, which is why plants keep buying fan-cooled boxes and keep writing the same tickets.
A passive design moves heat by conduction instead of air replacement, and the path is short. The die passes heat into its spreader, a thermal pad bridges the gap to the chassis wall, and the wall is the heatsink. On the GW200 the whole enclosure is a ribbed aluminium extrusion; the ribs add the surface area that natural convection needs on a body only 50 mm tall.
At 15 W this is solvable without a fan. What it is not is installer-proof:
Give it air. The fins need open space on at least two sides. Bolting the unit to a solid plate with the fins pressed against insulation turns the heatsink into a blanket.
Do not paint it or wrap it. A powder coat on the fins, or a plastic bag left on at commissioning, adds resistance a passive design cannot absorb.
Measure inside the cabinet, not in the aisle. A cabinet in a 30 °C shop can sit at 50 °C near the top of the door in July, and that is the ambient the PC actually lives in.
In exchange you get silence and a shaft with nothing to wear — no bearing, no filter schedule, no air path.
We ran the demonstration because “dustproof” is a claim buyers discount. The unit went into a chamber loaded with test dust simulating a machining floor and ran at sustained load while external thermocouples logged the chassis wall and the area around the processor. Then we opened it.
Two things came out. The first was the absence of a dust layer on the board, the memory slots and the connector shells — the visible difference between a sealed chassis and a filtered one. The second was the log: with the fins clean, the curve stayed inside the band the design expects, without the slow upward drift a clogged fin stack produces. The unit was still running when it was opened.
Be precise about what that proves. It is not an ingress protection certificate. The GW200 is a sealed fanless body, but the faceplate is full of openings, and each is a path for dust when the cabinet around it is dirty. Put it in an enclosure with a gland plate and sealed entries and the internals stay clean; hang it on an open frame and dust will find the USB ports like it finds everything else.
Cold is the end that catches people out, because a cold store does not fail a PC in the afternoon. It fails at the start of the shift, after the unit has sat at -18 °C overnight and somebody presses the button.
The GW200 is rated from -10 °C, uses industrial-grade rather than commercial-temperature components, and supports auto power-on, so a unit that loses mains comes back without anyone walking to the cabinet. In the wide-temperature demonstration it went through cold starts and sustained full-load running in a cycling chamber, 24 hours a day. It started and held load across the cycles.
Two notes the datasheet will not give you. The 60 °C figure is an ambient rating, and a passively cooled box that is fine at 40 °C in free air can exceed its limit inside a closed cabinet with a servo drive; mount it low and on the inlet side, not above the drives. And if you move a cold unit into a warm room, let it equalise before powering up — condensation on a cold board is the one failure here that has nothing to do with the design.
Buyers spend their time on the processor and then discover the project is decided by the connector count. The GW200 is built the other way round.
Serial. Up to six COM channels: DB9 connectors on the faceplates, plus two positions on the terminal block in some configurations. That is a scale, a VFD, a barcode reader and a PLC programming port without a USB-to-serial adapter for a cleaner to unplug.
Network. Two gigabit LAN ports keep the machine network and the plant backbone apart without a switch, which is the simplest way to satisfy IT when the office VLAN is off limits.
USB. Eight ports: four USB 3.0 up front for a camera, a backup drive or a licence key, four USB 2.0 at the rear for keyboard, mouse and dongles that never move again.
Display. One HDMI output at 1080p for a commissioning monitor or a permanent operator screen.
GPIO. Eight channels, four in and four out, on an orange pluggable terminal next to a remote power terminal. That is a stack light, a door switch and an e-stop relay without an I/O card, and a replacement unit is a five-minute swap rather than a re-termination job.
Wireless. An external push-pull SIM slot and dual antenna mounts for 4G, with WiFi on the same board family. The tray is reachable from outside, which stops being a small detail the first time someone has to change carrier on a cabinet-mounted unit.
Port counts vary by configuration on purpose: the GW200 datasheet lists the standard layout, and anything outside it is quoted rather than assumed.
A CMOS coin cell lasts three to five years. When it goes, the board loses its clock and its BIOS settings, the MES client starts posting work orders with a 2019 timestamp, and somebody has to open a sealed box in a dusty plant to change a battery cheaper than a coffee.
On the GW200 the cell sits in an external slot with a tool-free cover. The swap takes about three seconds, the seal is never broken, and maintenance drops from an hour of finding a technician and stopping the machine to a job a line leader does at shift change. It also solves a shipping problem: coin cells are regulated for air freight, and a battery that can be pulled from outside means the unit travels compliantly and arrives ready.
Machine tool cabinets. On the backplate beside the drives, RS485 to the CNC for program transfer and part counts, GPIO for the door interlock. The flanges take the vibration, and there is no fan to ingest cast-iron dust from the way covers.
Automation lines and andon stations. One unit runs the cell HMI, the stack light and the shift counter, and survives the wash-down beside it because there is no intake to protect.
Cold stores and outdoor cabinets. Rated to -10 °C with auto power-on, in an insulated cabinet at a freezer door, logging temperature and door events over 4G where the site network stops at the loading bay.
Smart pharmacy and dispensing. Silence matters when the cabinet stands in a retail space, and serial ports matter because dispensers, label printers and scanners are all RS232.
Vision cells. A USB 3.0 camera, a trigger input on the GPIO and two LAN ports, in a stainless enclosure beside the conveyor. Our deployment notes from a four-site rollout cover the cabling side of the same problem.
Remote monitoring. Inverters and meters on RS485, buffered locally, pushed upstream over 4G. A fanless box in an outdoor cabinet is the difference between a gateway that lasts five years and one that lasts a summer.
If the job needs a screen on the front of the machine rather than a box inside the cabinet, our industrial panel PCs use the same platform in a different form factor.
Item | GW200 specification |
|---|---|
Form factor | Fanless box PC, ribbed aluminium extrusion chassis, 267 × 143 × 50 mm |
Processor | Intel Core i5-5200U (5th gen) or i5-7200U (7th gen), 15 W TDP |
Memory | 4 GB / 8 GB / 16 GB DDR3 or DDR4, depending on board |
Storage | 128 GB / 256 GB / 512 GB / 1 TB, SSD or HDD |
Operating system | Windows 7 / 8 / 10 / 11, Linux; Windows 11 subject to the processor support list |
Display output | 1 × HDMI, up to 1080p |
Serial | Up to 6 × COM (DB9 and terminal block positions, depending on configuration), RS232 / RS485 selectable |
Network | 2 × GbE LAN |
USB | 4 × USB 3.0 + 4 × USB 2.0 |
Digital I/O | 8-channel GPIO, 4 DI / 4 DO, pluggable terminal with remote power terminals |
Wireless | External push-pull SIM slot for 4G, dual antenna mounts, WiFi on the same board family |
Cooling | Passive; full aluminium ribbed heatsink, no fan |
Operating temperature | -10 °C to 60 °C |
Power | DC 12 V |
Watchdog | Hardware watchdog, auto power-on after power loss, one-key recovery |
RTC battery | External CR2032 slot, tool-free hot swap |
Mounting | Wall-mount flanges, DIN rail option |
Weight | Approx. 2.5 kg |
Customisation | Laser-engraved logo, BIOS and OS pre-installation, industrial protective packaging |
Serial count and protocol. How many ports, and is each RS232, RS485 or RS422? A configurable port is still set at the factory, and it is cheaper to decide now.
I/O count and wiring. How many inputs and outputs, sinking or sourcing, at what voltage. The terminal is pluggable, so the answer decides the harness, not the box.
Mounting and clearance. Wall flange, DIN rail or a shelf, and the space left around the fins. A photo of the cabinet interior answers more than a drawing.
Operating system and image. Windows 10 IoT Enterprise LTSC, Windows 11 or Linux, with or without your application. We image the drive before it ships, so the unit arrives at the login screen your operators expect.
Storage and power. 128 GB covers a terminal; 512 GB or 1 TB if the unit logs images. Size the 12 V rail for peripherals as well as the PC, and say if the cabinet runs a 24 V bus, because a converter in the panel is one more thing to fail.
Send those five answers and our engineers will confirm the build against the current port map before anything is ordered.
No, and we will not claim it is. It is a sealed fanless chassis with no intake, which removes the main dust path, but the faceplate carries connectors. Ingress protection is a property of the enclosure you install it in — specify a cabinet with a gland plate and sealed entries.
The unit is rated to 60 °C ambient, which is not 60 °C inside a closed cabinet with drives in it. Measure the air where the PC will sit, keep it on the cool side of the panel and leave the fins clear. If the reading comes back above the rating, we will discuss a lower-power board or a different mounting position.
Windows 11 has an official processor list and it starts at 8th generation Core, so the i5-5200U and i5-7200U boards in the standard configuration sit outside it. For a five-year deployment we recommend Windows 10 IoT Enterprise LTSC or Linux, both supported here; if Windows 11 is a hard requirement, say so at enquiry stage and we will quote a newer board instead of shipping something you have to work around.
The serial channels are board-dependent, and both RS232 and RS485 are available. Tell us which port needs which protocol and how the device is wired; we confirm it port by port rather than promising “RS485” for the whole faceplate.
Yes. Laser-engraved logo, a custom BIOS boot logo, your OS image and industrial protective packaging are standard OEM options, and they are cheaper to settle before the first batch than after. The OEM and ODM industrial PC customisation page covers what changes and what it costs.