Reliable Industrial PCs for Every Industry

The NANO-I is an industrial edge computer the size of two paperback books: 178.4 × 127 × 60 mm, six USB ports, two serial ports, two Gigabit network ports and two display outputs, in an aluminium case that mounts on a desk, a wall or a DIN rail. What separates it from the fanless boxes in the same catalogue is the fan — an industrial dual-ball unit that lets one chassis carry a Celeron J6412 or a 12th-generation Core i7 without the thermal cliff that turns a fast processor into a slow one after thirty seconds of load. The platform is chosen per order. Memory is a single SO-DIMM, storage is a 6 Gbps SATA port plus an mSATA slot, and one Mini PCIe slot takes a WiFi or 4G module with two antenna holes at the rear. The front panel carries four USB 3.0 ports, two DB9 serial ports (RS-232 by default, RS-485 by jumper) and an illuminated power switch; the rear carries two more USB ports, dual RJ45, HDMI, VGA and the DC 12 V input. Operating range is −10 °C to 60 °C at 5–95 % relative humidity.

The GW200 is a fanless industrial PC built for one job: sitting in a sealed cabinet for years with no fan to seize. A 15 W Intel Core i5-5200U or i5-7200U is bolted to a solid aluminium block, and the 267 × 143 × 50 mm body is the heatsink — ribbed on top, sealed on the sides, with no vent to pull dust onto the board and no filter to clean on a maintenance round. Memory is 4–16 GB DDR3 or DDR4, storage is SATA from 128 GB to 1 TB, SSD or HDD, and the input is DC 12 V. The front panel carries the ports a machine builder actually wires: HDMI at 1080p, two serial ports, four USB 3.0, two Gigabit Ethernet ports, audio in and out, the DC jack, a power button, and two recessed pinholes for one-key recovery and clearing CMOS. The rear carries the cabinet side of the job: an 8-channel GPIO block with a remote power terminal, an external CR2032 battery slot, a SIM slot for 4G, two more serial ports and four USB 2.0. Two antennas and four holes in the base flanges finish the outside.

The UNO is a fanless embedded industrial PC in a 190 × 150 × 71 mm aluminum chassis, running Intel Core i3/i5/i7 from 6th to 13th Gen with DDR4 up to 64 GB. It brings 4 COM, 2 Intel GbE, 8 USB, VGA + HDMI + DP triple display, an 8-bit GPIO block and a remote power switch terminal into a machine-mounted box that needs no fan, no filter and no cabinet airflow.

BPC-103 is a 55 mm thin industrial PC built around processors designed in China: Zhaoxin U-series (x86), Phytium Tengrui D2000 (ARM64) or Loongson 3K3000 (LoongArch). It brings two Gigabit LAN ports, HDMI and VGA dual display, DDR4 memory up to 64 GB, an M.2 NVMe or mSATA system drive plus a 2.5-inch SATA bay, and native support for Kylin and UnionTech UOS — with Windows 7/10 available on the Zhaoxin platform. At 55 × 200 × 212 mm and about 2.5 kg, it mounts on a wall, inside a cabinet or on its own desk stands.