The 10.1" Dual-Screen AI Translator exists because of one awkward behaviour: passing a phone across a table. A single-screen translator is a relay — one person speaks, the other leans in to read, then the device travels back. The translation may be correct and the conversation still fails, because nobody is looking at anybody.
Every handheld translator solves the same problem the same way: one screen, one pair of eyes, and a device passed back and forth across the table. The translation itself is often fine. The meeting is what suffers, because whoever holds the phone reads first and the other person waits, and a negotiation turns into a relay race.
This unit splits a 10.1-inch panel into a host face and a guest face, angled away from each other. Both parties read their own language at the same moment, in their own line of sight, which is what preserves the eye contact that a business conversation actually runs on. There is nothing to hand over — it sits between you the way a conference speakerphone does.
The transcript streams while you speak instead of waiting for the sentence to close. The specification puts latency at 500 ms or less, which in practice means the other side starts reading before you have finished talking — the difference between a conversation and an exchange of letters.
Prices, dates and quantities are exactly where machine translation does real damage, so the interface places a confirmation key beside the transcript: both sides see the figure, one press puts it on the record as agreed. The unit also remembers which language each party used last time, so a repeat meeting skips the two minutes of setup that usually opens it.
A translator usually fails at the input stage long before it fails at the translation. Four microphones on the top plate steer a 360° beam and pick up speech at up to five metres, and the ANC stage is specified at more than 20 dB of noise reduction with a signal-to-noise ratio above 65 dB. In the supplier's own test a hall at 85 dB came out below 60 dB after filtering.
Two 4 Ω 5 W speakers carry the answer back, so a reply is audible at booth distance without a headset. That test number belongs to a trade-show floor; the venue itself decides the rest: a hard-walled hall with two booths shouting next to yours is worse than a carpeted meeting room. Tell us where the unit will stand and we will say plainly whether to expect the demo figure or something below it.
Each face carries a 5 MP camera. Point one at a business card, a contract page or a printed nameplate and the OCR layer lifts the text and lays the translation beside the original — a Chinese address into English, English payment terms into Chinese, with nothing retyped.
Translated text exports in one click for the CRM, the meeting note or the file. Be clear about what this is: document OCR on a countertop device, not a document scanner. A card, a page or a sign it handles well; a forty-page contract belongs in a document workflow. Send us a sample of your own document type and we will run it before you commit to a batch.
The board is a Rockchip RK3572 with a 4.0 TOPS NPU, 4 GB of DDR4 and 32 GB of flash, running Android. That combination is what makes the unit integrable rather than a sealed appliance: the NPU carries the parts of the pipeline that run locally — voice activity detection, noise suppression, the acoustic front end — and an Android build is something your own developers can work against if the terminal has to talk to an existing app.
Thirty-two gigabytes is not a large disk and four gigabytes is not a large memory budget. It is enough for the application and a working set of language models; it is not a machine for running a large model on the device without a network. If the requirement is offline operation, raise it at the enquiry stage rather than after the samples arrive — this unit translates over Ethernet or Wi-Fi, and the honest answer may be that it is the wrong fit. We would rather say that before you order.
An 8000 mAh pack is quoted at eight to ten hours of continuous use, which covers a full day on an exhibition stand or a shift at a reception desk without hunting for an outlet. Charging is over Type-C, which carries data as well; there is a separate DC input and a recessed reset button on the base next to the power key.
The wired side matters as much as the battery. Gigabit Ethernet is there for the fixed counter where IT will not open the Wi-Fi, and Wi-Fi 6 with Bluetooth 5.0 covers everything else. A booth with unreliable venue Wi-Fi is the normal case rather than the exception — tell us whether the site has a cable drop and we will configure the unit for that path.
The use cases share one shape: a counter with two people on opposite sides and no common language. Not a hall with one speaker and a hundred listeners — that is simultaneous interpretation hardware, and a different product.
· Trade fairs and exhibition booths — visitor qualification and product explanation without a bilingual colleague
· Hotel front desks and concierge — check-in, directions and complaints in the guest's own language
· Business negotiation rooms — supplier meetings, factory audits and distributor talks
· Airport, customs and public service counters — triage and guidance at the point of contact
· Hospital reception and triage — symptom description before an interpreter can be called
· Retail flagship stores — tourist customers at the counter
The nameplate on the front takes a laser-engraved logo, the boot screen and the interface can carry your brand, and the retail box and manual print to your artwork. The hardware is open enough for integrators to build on it, and the sample quantity is one unit with dispatch in 72 hours.
Because the shell is a moulded part rather than a machined one, changing the colour or the nameplate is straightforward while changing the housing shape is not — be clear about which you need. Send the artwork, the language pairs and the target market, and the quotation comes back with tooling, packaging and lead time separated.
Which language pair, and in which direction — the answer changes the model and sometimes the hardware. Where will it stand: a quiet meeting room, an 85 dB hall, or a counter with a queue behind it. Does the site have a network: cable, Wi-Fi, or neither. And what happens to the transcript afterwards: stays on the device, exports to a file, or has to reach your CRM.
Answer those four and the configuration, the accessories and the price follow from them. Ask for a sample of your own document and a recording of your own language pair — we would rather ship a unit tested against your material than a datasheet tested against ours.
Item | Specification |
Product type | 10.1" dual-screen face-to-face AI translator |
Display | 2 × 10.1" IPS, front and rear faces, angled away from each other |
Resolution | 1280 × 800 per screen |
Touchscreen | Capacitive on both displays, simultaneous two-side touch |
Operating system | Android |
SoC | Rockchip RK3572 |
NPU | 4.0 TOPS |
Memory | 4 GB DDR4 |
Storage | 32 GB flash |
Cameras | 2 × 5 MP (GC05A2), one on each face |
Microphone | 4-microphone array, 360° beamforming, 5 m pickup |
Noise handling | ANC > 20 dB, SNR > 65 dB; 85 dB hall filtered to < 60 dB (supplier test) |
Speakers | 2 × 4 Ω 5 W stereo |
Languages | 100+, two-way |
Subtitle latency | ≤ 500 ms, streaming |
OCR | Business card, contract and printed document; one-click text export |
Network | 1 × RJ45 Gigabit Ethernet or Wi-Fi 6 — a network connection is required to translate |
Wireless | Wi-Fi 6, Bluetooth 5.0 |
Ports | 1 × Type-C (charge and data), 1 × DC input, reset pinhole, power key |
Battery | 8000 mAh, 8–10 hours continuous use |
Charging | Type-C or DC adapter |
Dimensions | 245 × 130 × 225 mm (W × D × H); screen body 32 mm thick |
Weight | Approx. 2 kg |
Form factor | Countertop, angled two-face stand |
Housing | White moulded shell with ribbed speaker grille |
SDK | Open hardware and SDK support (documents on request) |
Designed for high-traffic commercial environments, this dual-screen AI voice translator machine is engineered part by part to deliver uncompromising translation accuracy and commercial-grade durability. Rather than using generic plastic housing, each structural component utilizes dedicated materials and specialized manufacturing processes:
Acoustic-Grade Metal Microphone Housing: The top plate features a rigid, laser-engraved metal cap that houses the high-precision 4-mic array, minimizing structural resonance and maximizing voice pickup clarity for real-time speech translation.
Smudge-Resistant Matte PC Body: Both the main casing and base plate are crafted from premium Polycarbonate (PC) with a fine matte finish, preventing fingerprints and glare during continuous daily operation at service counters and exhibition booths.
In-Mold Stamped OEM Nameplate: The central column features a PC nameplate with in-mold glossy grooves, designed specifically for custom brand logo integration under professional trade show lighting.
Direct-Molded Silicone Anti-Slip Base: Four integrated silicone feet keep the smart language translator terminal firmly planted when clients interact with the 10.1" dual touchscreens.
From hotel front desks to international trade counters, every detail of this simultaneous translation device is built for reliable, all-day multilingual communication. OEM/ODM customization is fully supported.
Meetneng traces its manufacturing back to 2008, and designs and builds in Shunde, Foshan, Guangdong — the district that supplies much of China's appliance and electronics industry. The plant covers 5,000 m² and the work is not assembled from someone else's boxes: sheet-metal fabrication, board-level integration, system assembly, burn-in and software imaging all happen on the same site, which is why a change to a port layout or a nameplate can be answered with a date rather than an introduction to a third party.
The product range covers industrial panel PCs, fanless industrial PCs, embedded computers, rugged tablets, industrial displays, and the commercial self-service terminals this page belongs to. Quality control runs to ISO 9001 with twelve inspection points from incoming components to the final functional test, and the field repair rate is held under 0.5 % — a number that matters more than any single specification on this page.
Thirty-plus patents are held by the engineering team, covering thermal design, structural details and the interface between the electronics and the enclosure. Units are issued with CE, FCC, LVD and RoHS documentation against the exact bill of materials of the build you order, because changing a radio module or a power supply changes the test scope.
More than 15,000 customers in over 100 countries have bought from us, across industrial automation, energy, medical equipment, security and retail. Reference accounts include Haier, Gree, BYD, Hikvision, Foxconn and CRRC. For a translation terminal the relevant part of that list is the counter experience: a device that has to survive being touched all day by people who did not read the manual.
Trade happens in person as well as over email. We take our own stands at international industrial and electronics fairs — the collage below is our booths across several shows — where a buyer can hear the four-microphone array work in a hall running at 85 dB instead of taking a noise figure off a page. Most of the requirements behind this product were collected at exactly that kind of counter: standing in front of a visitor you cannot answer. Between shows, buyers walk the Shunde line and sign off a sample; tell us when you are travelling and we will hold a slot and a sample build for the same week.
OEM and ODM are the default way we work rather than an exception. The engineering team takes a requirement list — CPU, memory, port count, logo, packaging, software image — and returns a configuration and a lead time. We exhibit at international trade fairs ourselves, which is where most of the requirements behind a product like this were collected: standing at a booth, unable to answer the visitor in front of you.
Units ship by express and air freight with export documentation and industrial protective packaging; stocked configurations leave within 72 hours and built-to-order units follow the lead time on the quotation. Tell us the application, the destination country and the annual volume, and we will come back with a configuration, a landed-cost estimate and a sample plan.
